Parts     

Minimum order value 30 + P&P + VAT
Please Note: prices correct as 1-1-2017.

From 1st September 2017 we now only operate an email service.

Email your list of parts required and we will confirm order total for you by return email with payment details.

Gasket set          Part No 8089          10.00

Seal set              Part No 8090          21.00

1/2 coupling      Part No 37463734  70.00

Numbers 1 to 25

Reference

number

Part Number Description of part Qty

req'd

Price each click on the links below to return
R1 P37814125 Transom plate 1 NLA return to drawing
R2 P32815117 pin nylon 10 1.60 return to drawing
R3 P32114126 plug breather 1 NLA return to drawing
R4 P7055 nipple greasing 1 2.50 return to drawing
R5 P36131314 zinc block 1 7.50 return to drawing
R6 P2224568 screw 1 0.50 return to drawing
R7 P33432309 sleeve swivel plate lock plunger 1 20.00 return to drawing
R8 P2725499 circlip sleeve locating 1 0.23 return to drawing
R9 P37811111 plunger pin and 'o' ring assy 1 26.50 return to drawing
R10 P32815117 pin nylon 1 1.60 return to drawing
R11 P31744128 spring 1 2.50 return to drawing
R12 P2415702 'o' ring 1 0.50 return to drawing
R13 P36285105 fork end plunger release 1 12.00 return to drawing
R14 P32713113 pin shackle cable 1 4.27 return to drawing
R15 P2221281 grub screw 1 0.50 return to drawing
R16 P2131037 washer 1 0.15 return to drawing
R17 P2117269 split pin 1 0.15 return to drawing
R18 P- - - return to drawing
R19 P36863113 transom gasket side wind 1 10.00 return to drawing
R20 P33426381 hub swivel 1 145.00 return to drawing
R21 P2546106 bearing roller input shaft 1 60.00 return to drawing
R22 P0040020 bearing ball input shaft 1 16.50 return to drawing
R23 P2721790 circlip locating bearing 1 2.80 return to drawing
R24 P2415507 seal input shaft 1 9.00 return to drawing
R25 P- - - return to drawing

Numbers 26 to 50

Reference

number

Part Number Description of part Qty

req'd

Price each click on the links below to return
R26 P- - - return to drawing
R27 P- - - return to drawing
R28 P- - - return to drawing
R29 P2415821 'o' ring rear swivel hub  1 1.50 return to drawing
R30 P33824117 'o' ring front swivel hub  1 1.00 return to drawing
R31 P36841412 strip swivel hub 2 1.60 return to drawing
R32 P33822406 thrust washer swivel hub 1 15.00 return to drawing
R33 P710951 housing worm drive 1 110.00 return to drawing
R34 P2513089 bush worm drive housing 2 2.00 return to drawing
R35 P32456408 shaft worm drive 1 8.50 return to drawing
R36 P31173109 worm gear 1 90.00 return to drawing
R37 P2513970 thrust washer worm drive 2 3.50 return to drawing
R38 P2115261 pin worm to shaft and tube assy 2 0.15 return to drawing
R39 P37442415 tube assembly 1 16.50 return to drawing
R40 P2222712 socket screw 7 0.50 return to drawing
R41 P31173201 worm wheel 1 125.00 return to drawing
R42 P2222712 screw 6 0.50 return to drawing
R43 P710915 handle cranking assy 1 NLA return to drawing
R44 P710938 plate swivel 1 200.00 return to drawing
R45 P2513911 bush top pins swivel fork to plate 2 2.80 return to drawing
R46 P2634018 buffer swivel plate 1 1.52 return to drawing
R47 P32524137 rod locating catch swivel fork 1 9.50 return to drawing
R48 P2211284 nut retaining rod 2 1.85 return to drawing
R49 P36113133 plate stop swivel plate 1 5.00 return to drawing
R50 P2222712 screw 2 0.50 return to drawing

Numbers 51 to  75

Reference

number

Part Number Description of part Qty

req'd

Price each click on the links below to return
R51 P7349 set screw swivel plate 6 0.72 return to drawing
R52 P2131041 washer to swivel hub 6 0.15 return to drawing
R53 P- return to drawing
R54 P- return to drawing
R55 P37466511 shaft input 1 85.00 return to drawing
R56 P2584601 cv joint  input 1 82.50 return to drawing
R57 P33531116 nut cv joint to input shaft 1 13.50 return to drawing
R58 P33121412 washer cv joint to input shaft 1 0.51 return to drawing
R59 P2581215 coupling flexible Polymer Type 1 70.00 return to drawing
R60 P0096635 set screw coupling 2 0.95 return to drawing
R61 P36478311 tab washer coupling 2 1.66 return to drawing
R62 P2131043 washer plain coupling 2 0.20 return to drawing
R63 P- - - return to drawing
R64 P- - - return to drawing
R65 P- - - return to drawing
R66 P- - - return to drawing
R67 P- - - return to drawing
R68 P- - - return to drawing
R69 P7003 transom plate 1 NLA return to drawing
R70 P7074 oil filler neck extension 1 NLA return to drawing
R71 PW18275  oil filler neck extension 1 NLA return to drawing
R72 PDE2010 oil filler cap 1 NLA return to drawing
R73 P7076 pin locating hydraulic cylinders 2 NLA return to drawing
R74 P- - - return to drawing
R75 P7008 transom gasket non swivel 1 NLA return to drawing

Numbers 76 to 100

Reference

number

Part Number Description of part Qty

req'd

Price each click on the links below to return
R76 P710901 fork swivel 1 200.00 return to drawing
R77 P32716123 pin pivot locating catch 2 5.80 return to drawing
R78 P36671134 catch swivel fork locating 1 60.00 return to drawing
R79 P2221281 socket screw 2 0.50 return to drawing
R80 P31751111 spring swivel fork 1 2.50 return to drawing
R81 P7005 fork swivel hydraulic 1 NLA return to drawing
R82 P7007 shaft hydraulic cylinder pivot 1 NLA return to drawing
R83 P7010 washer plain cylinder to shaft 4 0.50 return to drawing
R84 P7010 washer  steering 2 0.45 return to drawing
R85 P2727177 circlip, cylinder to shaft 2 0.36 return to drawing
R86 P32716121 pin centre fork to body 1 17.50 return to drawing
R87 P33813312 thrust washer fork 2 1.50 return to drawing
R88 P32716119 pin fork upper 2 9.00 return to drawing
R89 P2221285 socket screw 2 0.50 return to drawing
R90 P- - - return to drawing
R91 P7100 nut 2 NLA return to drawing
R92 P7099 washer 2 NLA return to drawing
R93 P7103 elbow stem 4 NLA return to drawing
R94 P7105 nut tubing 8 NLA return to drawing
R95 P7104 sleeve tubing 8 NLA return to drawing
R96 P7217 hose return to drawing
R97 P7219 pump motor 1 NLA return to drawing
R98 P7216 tee 3 NLA return to drawing
R99 P7218 gauge 1 NLA return to drawing
R100 P7166 reducer 1 NLA return to drawing

Numbers 101to 125

Reference

number

Part Number Description of part Qty

req'd

Price each click on the links below to return
R101 P7163 hose return to drawing
R102 P7165 nut 2 return to drawing
R103 P7164 sleeve 2 return to drawing
R104 P7162 adaptor 1 return to drawing
R105 P7214 clamp 1 return to drawing
R106 P7213 relay bank 1 return to drawing
R107 P7215 switch 1 return to drawing
R108 P7167 terminal 7 return to drawing
R109 P7161 connector 1 NLA return to drawing
R110 P7291 terminal 1 NLA return to drawing
R111 P7242 assembly steering arm and tee link 1 65.00 return to drawing
R112 P7225 upper steering link 1 80.00 return to drawing
R113 P2513906 bush steering arm 6 2.00 return to drawing
R114 P- - - return to drawing
R115 P- - - return to drawing
R116 P32762115 ball steering lower link 1 24.00 return to drawing
R117 P32813107 cup inner steering ball joint 1 15.00 return to drawing
R118 P33825111 cap outer steering ball joint 1 15.00 return to drawing
R119 P32716125 pin upper link to steering arm 1 4.80 return to drawing
R120 P2221281 screw 3 0.50 return to drawing
R121 P2222712 screw 4 0.50 return to drawing
R122 P33111411 washer 8 0.15 return to drawing
R123 P33825426 gaiter steering arm 1 17.50 return to drawing
R124 P7301 housing steering arm pivot 1 32.50 return to drawing
R125 P7335 screw 4 0.50 return to drawing

Numbers 126 to 150

Reference

number

Part Number Description of part Qty

req'd

Price each click on the links below to return
R126 P37421511 gear change (L or R) exchange only 1 109.00 return to drawing
R127 P36822517 gasket bearing to body 1 0.80 return to drawing
R128 P- return to drawing
R129 P33111411 washer 6 0.15 return to drawing
R130 P32732113 shaft gear change lever 1 22.50 return to drawing
R131 P0730135 'o' ring 1 0.30 return to drawing
R132 P0500003 key gear change shaft 1 0.75 return to drawing
R133 P37376481 lever operating gear change/ lock 1 60.00 return to drawing
R134 P33812114 thrust washer now 7010 1 return to drawing
R135 P37366641 operating lever  1 35.00 return to drawing
R136 P2222712 screw 1 0.50 return to drawing
R137 P32455506 plunger locking gear change 1 10.00 return to drawing
R138 P31742126 spring locking gear change 1 2.50 return to drawing
R139 P32161212 plug retaining spring 1 8.50 return to drawing
R140 P33812113 sealing washer 1 0.45 return to drawing
R141 P32711408 pin astern lock  1 7.08 return to drawing
R142 P36512111 fork to astern lock pin 1 2.29 return to drawing
R143 P33114411 washer 1 0.15 return to drawing
R144 P0610016  split pin astern lock pin to fork 1 0.15 return to drawing
R145 P7409 pin astern lock 1 12.00 return to drawing
R146 P- return to drawing
R147 P33111411 washer 1 0.15 return to drawing
R148 P32148311 screw adjusting 1 5.25 return to drawing
R149 P32114125 pin gear change rod to lever 1 7.50 return to drawing
R150 P34161109 rod gear change LH  1 65.00 return to drawing

Numbers 151 to 175

Reference

number

Part Number Description of part Qty

req'd

Price each click on the links below to return
R151 P34161111 rod gear change RH  1 65.00 return to drawing
R152 P0610002 split pin rod to lever 1 0.15 return to drawing
R153 P7280 lever bell crank 1 35.00 return to drawing
R154 P37378551 yoke operating dog clutch 1 25.00 return to drawing
R155 P32182112 pin pivot bell crank lever 1 12.50 return to drawing
R156 P33811111 washer sealing pin to body 1 0.20 return to drawing
R157 P- return to drawing
R158 P- return to drawing
R159 P- return to drawing
R160 P- return to drawing
R161 P37522491 body drive & Skeg 1 NLA return to drawing
R162 P37171751 skeg 1 NLA return to drawing
R163 P2222256 screw 10 0.50 return to drawing
R164 P- return to drawing
R165 P7222 bearing roller gear vertical shaft 1 55.00 return to drawing
R166 P0040005 bearing ball gear vertical shaft 1 16.50 return to drawing
R167 P37532891 top cover 1 65.00 return to drawing
R168 P32168105 plug oil filler top cover 1 16.00 return to drawing
R169 P0920351 washer plug oil filler 1 0.28 return to drawing
R170 P36857407 top gasket 1 0.80 return to drawing
R171 P2222712 screw 8 0.50 return to drawing
R172 P32161212 plug oil level 1 9.50 return to drawing
R173 P32158105 plug oil drain skeg 1 6.75 return to drawing
R174 P33812112 washer plug oil drain to skeg 1 0.40 return to drawing
R175 P33533114 bush astern lock pin 1 30.00 return to drawing

Numbers 176 to 200

Reference

number

Part Number Description of part Qty

req'd

Price each click on the links below to return
R176 P2415710 'o' ring astern lock pin 1 0.31 return to drawing
R177 P37446221 housing top bevel gear 1 120.00 return to drawing
R178 P36861724 gasket top bevel gear to body 2 0.85 return to drawing
R179 P33111411 washer  6 0.15 return to drawing
R180 P- return to drawing
R181 P- return to drawing
R182 P- return to drawing
R183 P37584125 splash plate 1 NLA return to drawing
R184 P- return to drawing
R185 P33134428 distance piece splash plate 2 NLA return to drawing
R186 P2227285 screw 2 0.50 return to drawing
R187 P2227283 screw 2 0.50 return to drawing
R188 P33884112 cv gaiter 1 44.00 return to drawing
R189 P7002 clip sealing gaiter 2 2.80 return to drawing
R190 P- return to drawing
R191 P- return to drawing
R192 P31174141 bevel gear top front/ lower 2 150.00 return to drawing
R193 P31174132 bevel gear lower 1 100.00 return to drawing
R194 P32462114 vertical shaft 1 50.00 return to drawing
R195 P36612118 retainer vertical drive 1 3.70 return to drawing
R196 P0748352 screw 2 return to drawing
R197 P0920052 washer 2 return to drawing
R198 P33177512 collar locating vertical shaft 1 23.50 return to drawing
R199 P2584602 cv joint rear 1 160.00 return to drawing
R200 P33451522 intermediate shaft 1 35.00 return to drawing

Numbers 201 to 225

Reference

number

Part Number Description of part Qty

req'd

Price each click on the links below to return
R201 P2724459 circlip shaft cv joint 1 0.66 return to drawing
R202 P2725191 circlip shaft cv joint 1 0.51 return to drawing
R203 P2724410 circlip cv joint to bearing 1 0.55 return to drawing
R204 P32767422 prop shaft 1 160.00 return to drawing
R205 P33431405 bush prop shaft 2 15.00 return to drawing
R206 P7147 bearing double row ball 1 55.00 return to drawing
R207 P33123118 spacer bearing to shaft 1 6.90 return to drawing
R208 P7146 spacer bearing to shaft 6.90 return to drawing
R209 P2724322 circlip bearing to shaft 2 0.52 return to drawing
R210 P31174152 bevel gear prop shaft 2 155.00 return to drawing
R211 P31138101 thrust washer dog gear thickness? 2 10.00 return to drawing
R212 P33571122 dog clutch  1 70.00 return to drawing
R213 P2415520 prop oil seal 2 4.75 return to drawing
R214 P33411503 housing oil seal 1 25.88 return to drawing
R215 P2415817 'o' ring prop housing 1 0.55 return to drawing
R216 P2116024 pin locating housing 1 0.15 return to drawing
R217 P31736114 circlip retaining oil seal housing 1 1.50 return to drawing
R218 P33151507 zinc ring 1 15.00 return to drawing
R219 P2221281 screw 2 0.50 return to drawing
R220 P- return to drawing
R221 P- return to drawing
R222 P- return to drawing
R223 P- return to drawing
R224 P- return to drawing
R225 P- return to drawing

Numbers 226 to 250

Reference

number

Part Number Description of part Quantity

required

Price each click on the links below to return
R226 P- return to drawing
R227 P- return to drawing
R228 P- return to drawing
R229 P- return to drawing
R230 P- return to drawing
R231 P- return to drawing
R232 P- return to drawing
R233 P- return to drawing
R234 P- return to drawing
R235 P- return to drawing
R236 P- return to drawing
R237 P- return to drawing
R238 P- return to drawing
R239 P- return to drawing
R240 P- return to drawing
R241 P- return to drawing
R242 P- return to drawing
R243 P- return to drawing
R244 P- return to drawing
R245 P7114 instruction transfer top link 1 n/a return to drawing
R246 P7125 motif port 1 n/a return to drawing
R247 P7126 motif stbd 1 n/a return to drawing
R248 P7114 instruction transfer top link hyd 1 n/a return to drawing
R249 P7115 motif port 1 n/a return to drawing
R250 P7116 motif stbd 1 n/a return to drawing

Numbers 251 to 275

Reference

number

Part Number Description of part Qty

req'd

Price each click on the links below to return
R251 P- return to drawing
R252 P- return to drawing
R253 P- return to drawing
R254 P- return to drawing
R255 P- return to drawing
R256 P7112 spinner nut (*nose cone) 1 37.50 return to drawing
R257 P33177511 tab washer 1 3.50 return to drawing
R258 P- return to drawing
R259 P33144114 distance piece 1 6.74 return to drawing
R260 P7389 hydraulic hand pump 1 return to drawing
R261 P7386 hose and fittings 1 return to drawing
R262 P7392 cylinder 1 return to drawing
R263 P7383 'o' ring cylinder to piston 1 return to drawing
R264 P7380 leg kick up bump stop 1 return to drawing
R265 P2222712 screw 2 0.50 return to drawing
R266 P33111411 washer 2 return to drawing
R267 P7362 transom plate non swivel NLA return to drawing
R268 P- return to drawing
R269 P- return to drawing
R270 P- return to drawing
R271 P- return to drawing
R272 P- return to drawing
R273 P- return to drawing
R274 P- return to drawing
R275 P- return to drawing

 

 

Reference

number

Part Number Description of part Qty

req'd

Price each click on the links below to return
G1 7299 steering arm & links assy 1 330.00 return to drawing
G2 7282 steering arm assy 1 120.00 return to drawing
G3 7301 housing and bushes 1 40.00 return to drawing
G4 7301 housing and bushes 1 40.00 return to drawing
G6 7242 arm and 'T' link end 1 70.00 return to drawing
G7 7296 roll pin 1   return to drawing
G10 7225 link and bushes 1 80.00 return to drawing
G11 7225 link and bushes 1 80.00 return to drawing
G14 7296 roll pin 1   return to drawing
  7353 Morse Cable retaining kit 1 50.00  
    Morse Cable Bayonet fitting only 1 25.00  
    Double polymer Coupling Assy 1 175.00  
    Propeller (state size and Hand) 1 153.00  
    Nose cone Kit 1 50.00  
 

Gasket set          Part No 8089          10.00

Seal set              Part No 8090          21.00

1/2 coupling      Part No 37463734  70.00

Minimum order value 30 + P&P + VAT
Please Note: prices correct as 1-1-2017.

Email your list of parts required and we will confirm order total for you by return email with payment details.

1-01-17   We reserve the right to amend prices without prior notice     E&O E

Terms and conditions of returned goods: 
If goods are accepted for return the company reserves the right to levy a handling charge on returned goods postage is not refundable. Returned goods must be received back to us in good condition and the customer may also be charged an administrative handling charge.

Contact details:
Plancraft Marine Ltd  

e-mail ONLY:   sales@plancraft.co.uk

Unit 4 Little Shellwood Farm, Clayhill road, Leigh, Reigate, Surrey, RH2 8PA.

Tel:01306 611100    Fax:01306 611101

e-mail:   sales@plancraft.co.uk